Join the ISRP Login to MyISRP
The International Society for Respiratory Protection
Get in Touch
Published on 12 November 2000 In 2000 - Sydney, Australia 915 downloads
abstract__daniel.pdf
Effects of ventilation of protective suits in reducing heat strain
Bruce Daniel
Engineering manager, S.E.A. Group, Sydney, Australia
Published on 12 November 2000 In 2000 - Sydney, Australia 965 downloads
abstract__bien.pdf
Cartridge Service Life Data — a Comparison between Models and Test Data
Ching-tsen Bien
LAO Consulting, Inc., Crofton, MD, USA
Published on 12 November 2000 In 2000 - Sydney, Australia 910 downloads
abstract__ledford.pdf
Quantitative Respirator Fit Testing & The Department of Energy
Cliff Ledford, Bryan Hiller
Respiratory protection program administrator, Fluor Hanford Inc, Richland, WA, USAVice president, Coastal Safety & Health Services, Inc., Sterling, VA, USA
Published on 12 November 2000 In 2000 - Sydney, Australia 855 downloads
abstract__bromwich.pdf
Chemical Permeation through Breathing Lines
D. Bromwich
Senior lecturer, School of Environmental Engineering, Griffith University, Qld, AUSTRALIA
abstract__caretti.pdf
Quantifying the Heat Stress Attributable to Respirator Wear
David D.Caretti
Research physiologist, US Army Edgewood CB Center, Aberdeen Proving Ground, MD, USA
Published on 12 September 2000 In 2000 - Sydney, Australia 852 downloads
abstract__grantham.pdf
Hazardous Substances Legislation vs Respiratory Protection
David Grantham
Occ Health Unit, Div of Workplace Health & Safety Queensland, Australia
Published on 12 November 2000 In 2000 - Sydney, Australia 873 downloads
abstract__capon.pdf
Modification of Avon Military Respirators for Use with Breathing Apparatus in Hostage Retrieval Situations
Dr. Andrew Capon
Avon Technical Products, UK
Published on 12 November 2000 In 2000 - Sydney, Australia 867 downloads
abstract__hern.pdf
Filter Design At The Interface Between Military Specifications And Civil Approval Standards
Dr. J.A. Hern
Research specialist, 3M Canada Co.
Published on 12 November 2000 In 2000 - Sydney, Australia 874 downloads
abstract__clifford.pdf
Respiratory Protection - A UK Prospective
Frank Clifford
Squadron Leader (NBC Policy), UK Ministry of Defence
Published on 12 November 2000 In 2000 - Sydney, Australia 909 downloads
abstract__hallet.pdf
Oxygen Deficiency & Personnel Safety
Frank Hallet
Safety and fire consultant/adviser, The Safety Consultancy, Sth Ockendon, UK
Published on 12 November 2000 In 2000 - Sydney, Australia 820 downloads
abstract__berndtsson.pdf
Standards: there is no such thing as "average breathing"
Göran Berndtsson
Safety Equipment Australia
Published on 12 November 2000 In 2000 - Sydney, Australia 918 downloads
abstract__richardson.pdf
The Effect of Testing Respirator Components with Real Breather Patterns as Opposed to Constant or Sinusoidal Flow
Grant Stewart Richardson
Scientific leader, DERA Porton Down, Salisbury, UK
Published on 12 November 2000 In 2000 - Sydney, Australia 779 downloads
abstract__yamada.pdf
Filtering efficiency of particulate filters against DOP particles
Hiroshi Yamada
Managing director, Shigematsu Works Co., Ltd, Iwatsuki, Japan
Published on 12 November 2000 In 2000 - Sydney, Australia 841 downloads
abstract__dower.pdf
NIOSH Respirator Standards Development Project for Certification of Respirators to Protect Emergency Responders from Terrorist Threats
J. M. Dower, R. W. Metzler
Senior researchindustrial hygienist, NIOSH, Div. of Resp. Disease StudiesBranch Chief, NIOSH, Div. of Resp. Disease Studies, and ISRP President
Published on 12 November 2000 In 2000 - Sydney, Australia 881 downloads
abstract__sawicki.pdf
Development of Biological Protective Ensembles
Jack C. Sawicki
Director, Business development, Geomet Technologies, Inc., Germantown, MD, USA
abstract__gardnerj.pdf
What are the Most Common Defects of Used Half Facepiece Respirators?
Jan Gardner, Sue Reed
Published on 12 November 2000 In 2000 - Sydney, Australia 903 downloads
abstract__eklund.pdf
Chemical bed degradation in self-contained self-rescuers deployed in U.S. coal mines
John F. Eklund
Senior sales and product manager, Trelleborg Protective Products, Ystad, Sweden
abstract__hofacre.pdf
Assessment of Chemical Vapor Releases in a Model Building
Kent Hofacre
Associate manager, Battelle, Columbus, OH, USA
Published on 12 November 2000 In 2000 - Sydney, Australia 883 downloads
abstract__rejnus.pdf
Individual Preparedness for Protection against Toxic Agents
Lars Rejnus
Director of Research, FOA Defence Research Establishment, Umeå, Sweden
Published on 12 November 2000 In 2000 - Sydney, Australia 853 downloads
abstract__backman.pdf
ISRP standard for Respiratory Protective Equipment
Lennart Bäckman
Safety Equipment Europe AB
Published on 12 November 2000 In 2000 - Sydney, Australia 807 downloads
abstract__osmond.pdf
Multi- personnel respiratory protection facility (MPRPF): an insight into collective protection
Neale Osmond
Project manager, Chemical and Biological Defence Sector, DERA Porton Down, Salisbury, UK
Published on 12 November 2000 In 2000 - Sydney, Australia 776 downloads
abstract__gardner.pdf
The Effect of Moisture on the Face Seal Fit of Half-Mask Respirators
Paul Gardner
Research engineer, US Army Edgewood CB Center, Aberdeen Proving Ground, MD, USA
Published on 12 November 2000 In 2000 - Sydney, Australia 748 downloads
abstract__jonsson.pdf
Protection performance of activated carbon filters against methyl isocyanate
Per- Gunnar Jonsson
Asst Dir of Research, FOA NBC Defence, Umeå, Sweden
Published on 12 November 2000 In 2000 - Sydney, Australia 751 downloads
abstract__hajime.pdf
Thermal Regeneration Method of a Respirator Cartridge for Organic Vapors
Prof. Hajime Hori
UOEH, Fukuoka, Japan
Published on 12 November 2000 In 2000 - Sydney, Australia 976 downloads
abstract__kim.pdf
Anthropometric Dimensions of Koreans and Their Associations with Fit of Quarter-Mask Respirators
Prof. Hyunwook Kim PhD, CIH, Don-Hee Han, Yong-Gyu Park and Young-Man Roh
Dept of Preventive Medicine, The Catholic University of Korea, SeoulDepartment of Biostatistics, College of Medicine, The Catholic University of Korea, SeoulDepartment of Industrial Safety and System Engineering, Inje University, Pusan, Korea